routerdefaults.ORG IP addresses, usernames, passwords, and more

Default settings of the Billion BiPAC 7402(G)X(L)

Here you can find the default IP address and the username and password for the user interface of the Billion BiPAC 7402(G)X(L) 3G/ADSL2+ Firewall router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.1.254
Username:
admin
Password:
admin

Preconfigured Wi-Fi settings

SSID:
wlan-ap
Password:
<blank>

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Billion BiPAC 7402(G)X(L), you have to do the following steps for access:

  1. Switch on router
  2. Set up a connection between the device and the router via Wi-Fi* or network cable
  3. Start web browser
  4. Enter IP address in the address bar and then confirm with ‘Enter’ key
  5. Enter username as well as password in the login form and confirm
* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the Billion BiPAC 7402(G)X(L) to its default settings, you have to do the following steps:

  1. Switch on router
  2. For at least 6 seconds, press the Reset button
  3. Device is automatically restarted
  4. Router has been reset to factory settings

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.