Default settings of the Genexis Platinum-7840
Here you can find the default IP address and the predefined access data for the user interface of the Platinum-7840 WiFi Cable VoIP router of Genexis. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
- IP address:
- 192.168.1.254 (or http://router)
- Username:
- admin
- Password:
- on a sticker on the router’s case
Preconfigured Wi-Fi settings
- SSID:
- starts with GNX
- Password:
- on a sticker on the router’s case
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the Genexis Platinum-7840, you have to do the following steps for access:
- Put router into operation
- Connect the device via Wi-Fi* or a network cable with the router
- Open browser
- Insert URL or IP address into the address bar and confirm with ‘Enter’ key
- Enter username and password in the open interface and confirm once more
Reset default settings
Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the Genexis Platinum-7840 to its default settings, you have to do the following steps:
- Put router into operation
- Press Reset button and hold for at least 6 seconds
- Device restarts automatically
- Restoration of standard settings is finished
After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.