Default settings of the Intellinet Network Solutions 520454

Here you can find the default IP address and the predefined access data for the user interface of the 520454 4-Port Broadband router of Intellinet Network Solutions. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:: 192.168.2.1
Username:: <blank>
Password:: <blank>

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Intellinet Network Solutions 520454, you have to do the following steps for access:

Turn on router
Set up a connection between the device and the router via network cable
Open web browser
Enter IP address in the address bar and then confirm with ‘Enter’ key
Enter password in the open interface and confirm once more

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the Intellinet Network Solutions 520454 to its default settings, you have to do the following steps:

Turn on router
Press Reset button for at least 4 seconds
Device is automatically restarted
Restoration of standard settings is finished

Execute software reset

With the Intellinet Network Solutions 520454, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.