Default settings of the Intellinet Network Solutions 523875

Here you can find the default IP address and the predefined access data for the user interface of the 523875 Wireless G Broadband Travel router of Intellinet Network Solutions. In the bottom part of this site, you will find a manual for accessing the router’s user interface.

Login data for the user interface

IP address:: 192.168.1.254
Username:: <blank>
Password:: <blank>

Preconfigured Wi-Fi settings

No wireless networks are preconfigured for this device.

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Intellinet Network Solutions 523875, you have to do the following steps for access:

Turn on router
Establish a connection between the device and the router via network cable or Wi-Fi*
Start web browser
Enter IP address in the address bar and then confirm with ‘Enter’ key
Enter password in the login form and confirm

* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute software reset

With the Intellinet Network Solutions 523875, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.