Default settings of the Netgear R6300
Here you can find the default IP address and the username and password for the user interface of the Netgear R6300 AC1750 Dual Band WiFi router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
- IP address:
- 192.168.1.1 (or http://www.routerlogin.net)
- Username:
- admin
- Password:
- password
Preconfigured Wi-Fi settings
- SSID:
- on a sticker on the router’s case
- Password:
- on a sticker on the router’s case
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the Netgear R6300, you have to do the following steps for access:
- Switch on router
- Set up a connection between the device and the router via Wi-Fi* or network cable
- Start web browser
- Insert URL or IP address into the address bar and confirm with ‘Enter’ key
- Enter username and password in the open user interface and confirm again
Reset default settings
Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the Netgear R6300 to its default settings, you have to do the following steps:
- Put router into operation
- Press Reset button and hold for at least 7 seconds
- Device is automatically restarted
- Default settings have been restored
After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.