routerdefaults.ORG IP addresses, usernames, passwords, and more

Default settings of the Sweex LW161

Here you can find the default IP address and the username and password for the user interface of the Sweex LW161 Wireless 150N router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.16.1
Username:
sweex
Password:
mysweex

Preconfigured Wi-Fi settings

SSID:
starts with SWEEX_LW161
Password:
on an information card that comes with the router

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Sweex LW161, you have to do the following steps for access:

  1. Turn on router
  2. Set up a connection between the device and the router via Wi-Fi* or network cable
  3. Open web browser
  4. Insert IP address in the address bar and confirm with ‘Enter’ button
  5. Enter username and password in the open user interface and confirm again
* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the Sweex LW161 to its default settings, you have to do the following steps:

  1. Switch on router
  2. For at least 15 seconds, press the WPS button
  3. Device is automatically restarted
  4. Router has been reset to factory settings

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.