routerdefaults.ORG IP addresses, usernames, passwords, and more

Default settings of the Tenda G3

Here you can find the default IP address and the username and password for the user interface of the Tenda G3 QoS VPN router. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.0.252
Username:
admin
Password:
admin

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Tenda G3, you have to do the following steps for access:

  1. Switch on router
  2. Establish a connection between the device and the router via network cable
  3. Open web browser
  4. Enter IP address in the address bar and then confirm with ‘Enter’ key
  5. Enter username as well as password in the login form and confirm

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the Tenda G3 to its default settings, you have to do the following steps:

  1. Switch on router
  2. Press RESET button and hold for at least 8 seconds
  3. Device restarts automatically
  4. Router has been reset to factory settings

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.