Default settings of the TP-LINK Archer MR600
Here you can find the default IP address and the predefined access data for the user interface of the Archer MR600 4G+ Cat6 AC1200 Wireless router of TP-LINK. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
- IP address:
- 192.168.1.1 (or http://tplinkmodem.net)
- Username:
- <blank>
- Password:
- <blank>
Preconfigured Wi-Fi settings
- SSID:
- on a sticker on the router’s case
- Password:
- on a sticker on the router’s case
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the TP-LINK Archer MR600, you have to do the following steps for access:
- Switch on router
- Connect the device via Wi-Fi* or a network cable with the router
- Start web browser
- Insert IP address or URL into the address bar and confirm with ‘Enter’ button
- Enter password in the login form and confirm
Reset default settings
Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the TP-LINK Archer MR600 to its default settings, you have to do the following steps:
- Turn on router
- Press and hold the WPS/RESET button until the router’s Power LED flashes
- Device is automatically restarted
- Default settings have been restored
After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.